Name	Description	Category
Hioki Voltage Detector 3120	Non-Metallic Contact Voltage Detector with Battery Life Indicator Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3120 is a non-metallic contact voltage detector with a power switch that also gives a clear indication of the battery state with a green LED. When voltage is detected, the LED lights red along with an audio signal.	Ground Clamp Meters \| Earth Testers \| Voltage & Phase Detectors
Hioki Safety HiTester 3258	World’s First Non-Metallic Contact Voltage Tester Measures 600V With Optimal Safety Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3258 is a line voltage tester that employs a coupling capacitance cancellation method to measure voltage in AC circuits without requiring metal-to-metal contact. Voltage can be measured safely at practically any location, on either insulated or exposed metal conductors.	Ground Clamp Meters \| Earth Testers \| Voltage & Phase Detectors
Hioki Earth HiTester 3151	Classic Earth Resistance Tester Using 3-Pole Method Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The 3151 uses the AC phase differential system to measure earthing resistance, which assures that accurate measurements are unaffected by earth voltage and auxiliary earthing resistance.	Ground Clamp Meters \| Earth Testers \| Voltage & Phase Detectors
Hioki Clamp on Earth Tester FT6380, FT6381	Lightweight Ground Clamps with Bluetooth® Data Transfer The FT6380 and FT6381 measure grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load...	Ground Clamp Meters \| Earth Testers \| Voltage & Phase Detectors
Hioki Lan Cable HiTester 3665-20	LAN Cable Tester for Shielded and Unshielded Twisted Pair Cables The 3665-20 is a hand-held LAN cable tester to easily test wiremap, measure cable length and identify twisted-pair cables, and is useful for verifying connections after installing connectors on cables. Optional terminators that facilitate easy identification of multiple cables make the LAN cable tester especially convenient for testing cables in working networks in the event of faults caused by open- or short-circuited cable...	Network \| LAN \| Optical Power \| Noise Testers
Hioki Optical Power Meter 3664	Test the Optical Power Integrity of Laser and LED Equipment The 3664 is an optical power meter for measuring the optical power of a spatial light. It is ideal for testing the optical power of a laser light source and an LED light source. The optional optical sensors for the power meter are interchangeable and their sensitivity can be adjusted independently. This product cannot perform measurement alone. Please purchase an optional light sensor separately. Use of Optical Sensor 9743/...	Network \| LAN \| Optical Power \| Noise Testers
Hioki LED OpticalL Meter TM6101	Wide 100 lx to 100,000 lx Range LED Optical Meter for Testing LED Optical Characteristics The TM6101 is an optical characteristic measuring instrument geared for the production lines of white LED and LED lighting devices. Based on Hioki’s proprietary filter spectroscopic measurement method, the LED optical meter measures optical characteristics such as luminous intensity, chromaticity and color rendering index of white LEDs with ultra high accuracy and offers a faster speed of measurement...	Network \| LAN \| Optical Power \| Noise Testers
Hioki External Shunt HS-1 series	Expand current range use with the 50 mV full scale meter (50/60 Hz, 0.5 % class) • Use in combination with a 50 mV meter • 30A to 300A	Meter Relays
Hioki Current Transformer CT-5MRN Series	Current Transformer in 1.0% Class to Expand the Input Range of Meter Relays The CT-5MRN is a current transformer that expands the input range of Hioki meter relays. Not CE Marked CT-5MRN100: 100A primary, 5A secondary CT-5MRN120: 120A primary, 5A secondary CT-5MRN150: 150A primary, 5A secondary	Meter Relays
Hioki Meter Relay 2104H/L/HL	Meter Relays in ±1.5% Class with 1 µA, 10 mV DC Movement for Power Saving Measures and Automation Hioki Meter Relays are industrial 1-channel devices to assist in energy saving and automation implementations. The 2104 series are 1-channel ±1.5% class meter relays featuring a sensitive 1 µA, 10 mV DC movement and a customizable scale. Not CE Marked • 2104H: Lamp lights up and output relay contact operates at deflection of the needle to the right of the setting needle • 2104L: Lamp...	Meter Relays
Hioki Meter Relay 2103H/L/HL	Meter Relays in ±2.5% Class with 1 µA, 10 mV DC Movement for Power Saving Measures and Automation Hioki Meter Relays are industrial 1-channel devices to assist in energy saving and automation implementations. The 2103 series are 1-channel ±2.5% class meter relays featuring a sensitive 1 µA, 10 mV DC movement and a customizable scale. • 2103H: Lamp lights up and output relay contact operates at deflection of the needle to the right of the setting needle • 2103L: Lamp lights up and...	Meter Relays
Hioki X-Y Board HiTester 1270, 1271	Double-sided Board Tester with Maximum Measurement Speed of 0.012s/Step The 1270 and 1271 are fixtureless, dual-sided, bare board testers that provide superior cost performance. Using a total of four arms, two in front and two in back, it is capable of simultaneously testing both sides of an optional board, and is available with a4-terminal resistance measurement function that enables measurement of very small resistances in IVH or through holes. Testable board dimensions (1270): 50 × 50...	Bare Board Testing
Hioki X-Y C HiTester 1116 Series	100 Steps/Second Ultra-High Speed Board Pattern Inspection System The 1116 Series are high-speed substrate testers that use capacitance testing to greatly reduce the number of testing steps and time required compared to the continuity testing method. They support ordinary bare boards to high-density BGA, CSP, or MCM packages, as well as flexible boards. 1116-71 (Offline type) 1116-72 (Single-robot transport) 1116-73 (Offline, with 1945-21 and 1945-22) 1116-74 (Single-robot transport, with...	Bare Board Testing
Hioki Bare Board HiTester 1230	All-In-One Solution for Testing the Reliability of Connections on Printed Circuit Boards The 1230 is a bare board tester with the testing capabilities of an in-circuit tester, delivering highly consistent low-resistance measurements with high speed high precision.	Bare Board Testing
Hioki Bare Board HiTester 1232-11	High-Precision Batch Fixture-Type Testing System that Support Boards with Embedded Passive and Active Devices The 1231-11 is a bare board tester that utilizes the full range of Hioki’s in-circuit testing technologies to deliver LSI reliability testing, complex component separation testing, high continuity and insulation testing, and more.	Bare Board Testing
Hioki Bare Board HiTester 1236-11	Super-High-Speed Testing System for Boards with Embedded Passive and Active Devices Utilizing the Index Table Method The 1236-11 is a bare board test system that harnesses Hioki’s populated board testing technology and includes support for next-generation boards with embedded passive and active devices. It features mass-production capabilities that uses test heads (test fixtures) to test fine pitch boards.	Bare Board Testing
Hioki Bare Board HiTester 1231-11	Semiconductor Package Board Testing System Utilizing Index Table Method The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards.	Bare Board Testing
Hioki X-Y in-Circuit HiTester 1240-01/-02/-03	Detection of IC lead pseudo-contact (poor contact) states • High-speed testing at up to 0.025 sec./step (1240-01, 1240-03) • Detection of IC lead float and pseudo-contact states • Support for active testing (optional feature) • High-precision probing • Large testing area of 510 × 460 mm (1240-01, 1240-02) • Standard transport capability • Automatic alignment function and simple visual test function	Populated Board Testing
Hioki In-Circuit HiTester 1220-50/-51/-52	High Performance Populated Board Testing with Expansion Capabilities In populated board production settings where improving productivity is key, even small time losses are unacceptable. The 1220 series provide a single solution for jobs that previously required multiple measuring instruments, featuring a compact PCI bus that delivers a dramatic speed boost of 150%.	Populated Board Testing
Hioki Fit-Line Inspection Data Creation System UA1780	Data Creation System Delivers 90% Faster Data Generation, 93% Lower Line Stoppage Times The UA1780 enables high-quality test programs in a short period of time by using net information that has been reverse-generated from Gerber data and component information libraries, and delivers maximum performance when used in conjunction with Hioki’s new FA1240-50 flying probe tester.	Populated Board Testing